Types of Door Locks for Patio Doors in Aylesbury
Sliding patio doors in aylesbury are a great method to increase the amount of light in your home. They are easy to maintain and they're extremely secure.
A customer contacted us to discuss the possibility of having a new lock fitted to their front door. After a wide range of options were discussed they chose to have a Yale night latch installed and new keys provided.
Sash Locks
Sash locks are among the most popular mortice locks and they work by using a combination of latches and deadbolts. These locks are fitted within the door's material and operate with a key to lock or unlock them. They are perfect for both front and back doors as they are very secure. Sash locks are available in a variety of sizes to fit all door thicknesses, and can be installed on both hardwood and UPVC doors.
There are many different types of sashlocks, however the two most well-known are three lever and five lever sashlocks. The mortice sash lock that has five levers is among the most secure options available and is in compliance with British Standards for thief-resistant locks. It also comes with a face plate and striker which can be customized to match the door knobs or handles. The three-lever sash lock is not as secure however it still offers sufficient security for domestic use. It is also easy to customise, as it has fewer levers and can be used on all internal doors.
The rim profile sashlock is a different kind of sashlock. These are similar to sash locks however, they are not fitted into the door. Instead, they are attached to the surface of the door and are locked using the same key from both sides. They are suitable for indoor doors where privacy is required for privacy, like bathrooms and bedrooms.
A sash window lock is an excellent way to safeguard your home from intruders as well as ensure your children's safety. These locks prevent the sash from opening too much and ensure that children aren't thrown out of the windows. They are available in a variety of sizes, ranging from 3 inches to 5 inches and are an excellent option for any window restoration project.
Sash window locks are easy to install and can be done at home by any D.I.Y enthusiast. To begin you'll need a pencil and ruler to mark the central location where you'd like to install the lock. Once you have marked the spot you'll need to remove any old screws that hold the sash in place. After removing the screws you must wash off any debris or paint that may have remained. After that, you can install the new fastener.
Mortice Locks
A mortise is a large mechanism that slots into the door's inside. They are commonly found in older buildings, as well as contemporary residential construction. In reality you can still buy mortise locks at hardware stores today. It's a very secure and sturdy option, and is ideal for securing doors in areas with high traffic such as hospitals and schools.
It is impossible to utilize a mortise locking system using a standard knob or handle because the bolt will only retract when a key is used. It is also essential to select knobs and handles that are ideally sized for the lock case. The bolt will not be able to move unless you turn the knobs. Refer to the lock diagram for any questions.
Mortice locks are generally made of durable materials that can withstand a great deal of wear and tear. They are extremely hard to break, even under extreme pressure. They are a great option for areas that are heavily used, like schools and hospitals where they are subjected to a lot abuse.
Similar to rim locks mortise deadlocks come in several different styles and security levels. There are three-lever mortice locks which are usually used on doors inside, like bedrooms or in-between porches. They are not as secure as mortice locks with five levers due to the fact that they have smaller levers.
If you're considering fitting a mortice lock on an exterior door, you need to ensure that the lock you buy is British Standard approved. This will ensure your door is secure and will stop intrusions into your home or the theft of valuables.
A mortise locks works by locking in the form of a pocket cut into the inside frame of the door. This pocket is called a 'mortise' and the lock is secured by a 'lock case' that's fixed to the door frame by screws or nails. A hard collar is often attached to the exterior of the cylinder, so that it can't be removed using the pipe wrench.
Cylinder locks
Cylinder locks are a common option for uPVC doors and are also available for timber and composite doors. They are comprised of two components - the lock, which is activated by the door latch and/or dead bolt and the cylinder that controls it. The design permits both components to be swapped out when needed. This is beneficial if a part does not perform as expected or you wish to upgrade to a more secure cylinder.
The lock cylinder has a series of pin pairs inside it. It is the part of the lock that receives keys. When the correct key is put into the lock cylinder the notches on it push the pins up to different levels. This allows them to rotate and unlock the doors. If you use a wrong key the notches will not align and the majority of pins will remain at their normal position.
There are a variety of cylinder locks that are available, ranging from simple pin tumblers to high-security models that resist multiple lock picking techniques. The more pins that are in a cylindrical lock, the more difficult it is to pick them. Standard cylinder locks typically have six pins. Higher security versions can have as many as thirteen pins. These pins can be referred to as "security pins". There are a myriad of security pins, including spool pins that have narrow waists that is reminiscent of a cotton spool and serrated pins which have one or more narrow grooves cut into them.
A cylinder lock can be installed more easily than a mortise because the door frame doesn't require drilling. However, it's a good idea to have your door frame professionally measured and fitted to ensure the lock is in the correct position. If your door is not square, you will have to select an offset cylinder.
Cylinder locks provide a high level of security, and are less expensive than smart locks. They are a great option for homes that don't require as much security, or for people who are looking to secure their home quickly and easily. They are especially efficient if your door has a already been drilled for the lock.
Mullion Locks
A mullion is the middle section of a double doorway. It divides it into two sections, allowing the other side to be used as an opening in one. It can be fixed, or removed. window repairs aylesbury are available in metal, wood or plastic. They can be used in conjunction with mortise or rim lock exit devices. They enhance the security of double doors as well as provide a wider exit than rods that are vertical. They are also suitable for hurricane, high-use and fire rated doors.
During construction, a mullion is likely to be welded to the head of the frame and then fixed to the ground. However certain mullions are made to be removed, making them a great option for commercial projects where the location of a door may change often. For instance when a business owner plans to build an employee entrance on the back of their building, they could simply remove the mullion to allow deliveries and larger furniture to pass through the door.
The removal of screws and bolts is required for traditional mullions. These fittings are set into the floor or the top of the door's frame. This is often a time consuming and labor-intensive procedure that requires two people. In time, repeated removals could cause the fittings and mullions loosen. If the mullions aren't in place, large machines, carts and gurneys cannot easily move through the opening.
A keyed door mullion that can be removed has been developed to solve this issue. It allows the removal of a mullion effortlessly and quickly from the top bracket with the rim the cylinder. This is beneficial when a large, clear opening in the door is required. The PDQ 9300 series removable mullions are designed to be used with Rim Exit Devices 6300/6400 series for doors that are in pairs. The top bracket may also be lifted to allow the bottom fitting 20 to be permanently attached to the floor 14 in order to raise the protrusions that extend upwards. This opens the latch and the mullion is able to be removed for a short period of time. The mullion will then automatically engage the latch when it is reinstalled.